Are you looking for an answer to the topic “lq9 vs ls2“? We answer all your questions at the website barkmanoil.com in category: Newly updated financial and investment news for you. You will find the answer right below.
Keep Reading

Is an LS2 the same as LQ9?
This. The LQ9 is a GEN III based engine, easily interchangable with LS1 cars and still interchangeable with LS2’s with a few tweeks. LS2’s have a different reluctor, and the cam sensor is on the timing cover.
Is the LQ9 an LS motor?
…
LQ9 Performance Specifications.
Engine Ratings | |
---|---|
Compression Ratio | 10.1:1 |
Horsepower Rating | 345 hp |
Torque Rating | 380 ft./lbs. |
The Best LS Engine To Build For Horsepower
Images related to the topicThe Best LS Engine To Build For Horsepower

Is the LQ4 the same as LS2?
Yes an no they are the same bore and stroke but have some difference. Namely the pistons and compression ratio. The LQ4 has dished pistons and runs lower CR.
Is an LQ9 a good engine?
The LQ9 is a limited production engine and VERY desirable as it is the HO 6.0L and comes with a premium price. Price Considerations: The LQ9 being a limited production engine often comes with about a $1000 premium over a similar age / mileage LQ4.
What does LQ9 stand for?
LQ4 and LQ9 were code designations for the General Motors Generation III 6.0-liter, V-8 engines that were used in the company’s truck applications in the mid-2000s. These engines saw duty in several GM trucks in the Chevrolet and Cadillac product lineup.
Is a 6.0 an LS2?
The 6.0 liter V8 LS2 engine was produced by General Motors for use in performance vehicles and sports cars. It is part of GM’s Gen IV Small Block engine family and was first introduced in the 2005 Chevrolet Corvette C6, Chevrolet SSR and the Pontiac GTO.
How much HP can a LQ9 handle?
The LQ4 and LQ9 have very strong blocks. They can handle over 1,000 hp.
See some more details on the topic lq9 vs ls2 here:
Differences between LS2 and LQ9?? – LS1TECH
The LQ9 is an iron block vs the LS2 is aluminum. The LQ9 is essentially just an LS1 minus aluminum with a little bigger bore.
Forced With a Decision (LS2 or LQ9) – ThirdGen.Org
LQ9 and LS2s are 364 c.u. The LS2 weight less but the LQ9 has better heads so you can make more power with the stock heads. The truck LQ9s and …
Is an LQ9 Really an iron LS2??? | LS1GTO Forums
This. The LQ9 is a GEN III based engine, easily interchangable with LS1 cars and still interchangeable with LS2’s with a few tweeks. LS2’s have …
LQ9 vs LS2 – PerformanceTrucks.net Forums
LQ9 has a smaller cam, lower compression 317 heads that flow about the same as the 243’s and the truck intake vs. the LS2 intake. Is there …
What vehicles came with a LQ9?
The LQ9 was an improved, high-output version of the LQ4. It was introduced in 2002 for the Cadillac Escalade. It was available in the Escalade and GM pickups until 2007. The LQ9 was also known as the Vortec HO 6000 or the VortecMAX.
How much does a LQ9 cost?
Base Price LQ9 $13,499 / LY6 $14,199.
Is a LQ4 an ls6?
The LQ4 is a 6.0L LS (Gen. 3) small block engine used in GM trucks between 1999 and 2007. For marketing purposes, it was also known as the Vortec 6000.
Is LQ4 different from an LS?
Is An Lq4 An Ls? Originally introduced in 1999 as an LS truck engine, the LQ4 is a versatile engine, capable of powering anything from trucks to vans. In 2007, Chevrolet, Cadillac, and Buick vehicles were introduced with a V-8 engine. Vortec 6000 and LQ4 were also models from the same company.
6.0 Ls2 Envoy vs 6.0 Lq9 Ext Cab
Images related to the topic6.0 Ls2 Envoy vs 6.0 Lq9 Ext Cab

How much horsepower does a LQ4 have?
When shopping, it’s important to do your homework. There are two 6.0L iron-block engines out there, the LQ9 (345 hp) and the LQ4 (300-325 hp).
Which LS engine is strongest?
LS9The most powerful production engine ever from GM, the LS9 is the 6.2L supercharged and charge-cooled engine of the Corvette ZR1. It is rated at an astonishing 638 horsepower. The LS9 uses the strengthened 6.2L block with stronger, roto-cast cylinder heads and a sixth-generation 2.3L Roots-type supercharger.
Is the LQ9 or LQ4 better?
The 6.0L LQ4 and LQ9 are iron blocks, only difference between them is compression ration. Only real difference is pistons LQ4 had dished and LQ9 had flat tops (yes rods were different on early LQ4 and 99-00 had iron heads) Only way to tell is look at pistons or vin of donor save for 99-00 with iron heads as its an LQ4.
How much HP can you get out of a 6.0 LS?
If we were to run the 6.0L in stock trim, the resulting power output would be around 400 hp (on this dyno the way we test). If we apply 14.5 psi from our turbos to the stock 400hp engine, we might get 800 hp.
How do I know if I have a LQ9?
There is only one difference between an LQ4 and an LQ9: the piston. The block or head does not have any exterior markings that indicate one over the other, such as embossed or etched. An engine type sticker is applied to the back of the drivers’ side heads at the time of manufacture.
What motor is a LQ9?
Engine Block Specifications | |
---|---|
Casting Numbers | 12551364, 12573581, 12577184 |
Displacement | 6.0L / 364 cid |
Bore Dia. | 4.000 in. |
Stroke | 3.622 in. |
Does LQ9 have AFM?
Like the rest of the Gen 3 truck engines, the LQ4 used a 24x reluctor wheel and a three-bolt cam and didn’t have AFM/DOD/VVT. In 2002, Chevy released a high output version of the 6.0 known as the LQ9 or Vortec Max engine. This engine can be identified by a letter N in the 8th digit of the VIN.
How much HP can LS2 handle?
The LS2 engine block has a 4.000-inch bore diameter. The cylinders can be bored to 4.030 inches. However, we recommend leaving them as thick as possible when running boost. The block can handle 850 horsepower.
How much horsepower does a 6.0 LS2 engine have?
Performance Specifications | |
---|---|
Compression Ratio | 10.9 : 1 |
Horsepower Rating | 390-395 hp. |
Torque Rating | 400 ft./lbs. |
Lq9 build. Iron block ls2
Images related to the topicLq9 build. Iron block ls2

Is Vortec and LS same thing?
Although Vortec engines are “LS” based they are NOT LS engines IMO. Besides most Vortec’s being iron block, as seen above there are some serious size differences and considerations depending on your project. VORTEC ENGINE IN CARS: For the most part, it will be challenging to put a Vortec truck engine into a car.
Is the LQ9 aluminum?
They are all aluminum heads. The LQ4 heads are iron I believe, the LQ9s are aluminum. I think it was only earlier year LQ4s, but I’m not 100%. I don’t really keep up with any of the truck engines other than the LQ9 and the L92.
Related searches to lq9 vs ls2
- ls2 engine
- 6.0 lq9 vs ls2
- is a 6 0 a ls1 or ls2
- lq4 vs lq9 vs ls2
- ls2 vs lq4
- ls2 vs lq9 pistons
- lq9 vs ls2 differences
- iron ls2
- ls2 vs lq9 block
- lq9 vs ls1
- lq9 vs ls2 weight
- is lq9 aluminum block
- lq9 vs ls3
- is a 6.0 a ls1 or ls2
- lq9 engine vs ls2
- ls2 vs lq9 boost
- iron block ls2
Information related to the topic lq9 vs ls2
Here are the search results of the thread lq9 vs ls2 from Bing. You can read more if you want.
You have just come across an article on the topic lq9 vs ls2. If you found this article useful, please share it. Thank you very much.